MorphoWave
TM
OEM
– Installation guide
Section 3 :Installation Procedure
36
IDEMIA
D
OCUMENT
–
R
EPRODUCTION AND
D
ISCLOSURE
F
ORBIDDEN
2015_2000009096 V6
January 2019
MorphoAccess Sigma Wave installation
Before proceeding to the installation
Make sure that you have all the components described in “Components of the
package” section at your disposal.
Remove the wall plate. Keep this element at hand.
Remove the screw at the bottom of the product. Keep this element at hand.
Figure 7: Removing wall frame and screw
It is then possible to fix the terminal on the wall.
The recommended height for fixing of the terminal is 1.40m (camera height).
For an optimal use the terminal must be installed in an area where the
lighting conditions are controlled. Avoid direct exposure of the sensor to
the sun light and ensure good ambient lighting for face detection if used.
1
2
