MorphoWave
TM
OEM
– Installation guide
Section 1 : Introduction
2015_2000009096 V6
January 2019
IDEMIA
D
OCUMENT
–
R
EPRODUCTION AND
D
ISCLOSURE
F
ORBIDDEN
21
The MorphoWave
TM
OEM terminal sends User ID to the Controller
The Controller sends its decision to the MorphoWave
TM
OEM terminal (which
displays access granted or access denied depending on the answer)
The MorphoWave
TM
OEM terminal sends an alarm signal to the Controller as soon
as a malicious operation is detected (terminal pulled out from the wall or opened
for maintenance operations); refer the paragraph dealing with anti-pulling and
anti-tamper switches for more explanations.
The Controller is part of the global Access Control System of the secured area, which
for instance can administrate the White List of the Controller and receive diaries of the
decisions taken by the Controller.
An Alarm (3rd party product)
This element is connected to the MorphoWave
TM
OEM terminal through a dry contact.
The MorphoWave
TM
OEM terminal sends the command to activate the Alarm as soon
as a malicious operation (terminal pulled out from the wall or having its bottom cover
opened out of maintenance operations) is detected; refer the paragraph dealing with
anti-pulling and anti-tamper switches for more explanations.
A Door Electric Latch or equivalent (3rd party product)
This element once activated opens the access. The Controller is the one which sends
the command to activate the latch if access is granted (i.e. if the individual's User ID is
listed in the Controller White List). Connection between these two elements is done
through a dry contact.
