Idemia MorphoWave OEM, Руководство по установке

Страница: 67 / 112

MorphoWave
TM
OEM
– Installation Guide
Annex 1 : Maintenance
2015_2000009096 V6
January 2019
IDEMIA D
OCUMENT
–
R
EPRODUCTION AND
D
ISCLOSURE
F
ORBIDDEN
67
First biometric record and identification
To confirm the correct setup, we suggest to perform the first biometric enrollment and
identification on your MorphoWave
TM
OEM terminal in standalone setup (no
connected to the network). Please follow instructions below:

Switch on the MorphoWave
TM
OEM (PC, biometric sensor, Ethernet switch)

For this first training, it is not required to plug external network RJ45 cable, all
operation are suitable for standalone mode.
The MorphoAccess Sigma Wave displays the
boot screen. The boot may take few minutes
at the first launch.
Then the “First Boot Assistant” will appear to
let the user set preferences.
This screen is optional; you can bypass it
clicking on OK button.
The main screen with animation is displayed.
The system is ready to use.
For the moment the sensor light is turned off
because nobody is in the database.
Go in administration menu by clicking on on
the lock screen corner left.
By default the password is “12345”. It is
recommended to change it at the first time.