MorphoWave
TM
OEM
– Installation guide
Section 2 :General Description
28
IDEMIA
D
OCUMENT
–
R
EPRODUCTION AND
D
ISCLOSURE
F
ORBIDDEN
2015_2000009096 V6
January 2019
MorphoWave™ OEM Wave Technical Characteristics
Item
Description
Access control modes
Identification (search for fingerprint in a local database)
Authentication with user ID checking with biometry
Proxy: the access control check is fully driven by a
remote system
Man Machine Interface
5” WVGA color Touch-screen
VGA camera for face image capture and videophone
Loudspeaker & Microphone
Biometrics
External and innovative Morpho sensor: MorphoWave
Desktop. It is 4 fingers contactless sensor.
NB: You may receive a MorphoAccess Sigma Wave still
equipped with a slap sensor built-in. In a MorphoWave
OEM® context this sensor is disabled.
False Acceptance Rate (FAR) adjustable from 1% down
to 10-7%
Database capacity: 10.000 users (standard) and up to
40.000 users (license upgrade). One user template is
composed of 8 fingerprints for both hands except
thumbs.
Log capacity
100 000 records (standard) and up to 1 000 000 (with
specific license)
LAN connection
For terminal configuration and data transfer:
Ethernet 10/100 Base T (MDI, MDI-X)
Either TCP, SSL or TLS protocol
Serial port
The serial port supports WIEGAND, DATACLOCK (ISO2),
RS422 and RS485 protocols
Output relay switches
Access granted: 1 switch (normally “open”)
Input signals
LED1/LED2 to activate the access granted relay
Power supply
12 to 24 V DC power supply (1A min @12V)
Or RJ45 connector with optional Power Over Ethernet
component
