IBM TotalStorage SAN256N Director 2045-N16, Руководство по установке и обслуживанию, Страница: 88 / 157

SAN256N Director 2045-N16
68
Establishing a remote dial-up connection
Use the following procedure to establish a remote dial-up (modem) connection to the
host (local) workstation.
1. From the remotes screen, double click on Modem.
2. A connectioning screen opens, indicating that pcAnywhere is dialing to the host
workstation.
3. Once connected, the login screen appears.
4. Enter the correct User name and password. Once authenticated, the desktop of the
customer’s workstation should be displayed.
5. Once a connection is established, the user can control the host workstation. To do a
file transfer, select File Transfer from the Session Manager options on the left side of
the screen.
A screen will come up that displays the file structure of the remote and host
workstations. To transfer files using your mouse, left click the file and move it over to
the other screen.
Configure an Internet host connection
Use the following procedure to configure TCP/IP connectivity to the host (local)
workstation.
1. After starting pcAnywhere, select Hosts from the left navigation bar on the
pcAnywhere Manager screen.
2. Select and right-click Network, Cable, DSL from the Hosts Properties screen. A
drop-down menu opens, select Properties. The Host Properties screen opens.
3. Select TCP/IP from the Device list, and Optimized for High Bandwidth at the
Connection Info tab.
4. Select Launch with Windows and Run minimized from the Settings tab.
5. Select pcAnywhere encoding from the Security Options tab. Click Apply.
6. Select pcAnywhere as the Authentication type from the Callers tab. Click the Caller
list icon to add a new caller/item.
7. Enter the assigned Login name and Password for this workstation at the Identification
tab. Click OK when finished.
8. Login names and passwords are maintained and controlled by IBM Technical
Support.
9. The new login name is displayed under the Caller list of the Callers tab. Click OK.
After the host setup is complete, reboot the host workstation to activate the setup
changes to pcAnywhere. After the reboot is finished, the host workstation is now able
to accept connection from a remote workstation.
Start an Internet host session
Use the following procedure to start an Internet (TCP/IP) session to the host (local)
workstation.