IBM TotalStorage SAN256N Director 2045-N16, Руководство по установке и обслуживанию

Страница: 74 / 157

SAN256N Director 2045-N16
54
9. The Enterprise Manager will now discover the SAN256N and will update the screen.
This will take a few seconds. Double-click the Director link in the directory tree, and
then click the SAN256N director. The graphic view of the SAN256N director will now
be displayed.
Changing preassigned IP addresses of the Enterprise Manager
Server PC workstation
The factory set or customer-provided preassigned IP address of the Enterprise Manager
workstation may be physically changed via the Enterprise Manager workstation itself.
Use the following procedure to change the Enterprise Manager workstation IP address.
1. From the Windows desktop, click Start | Settings | Control Panel.
2. Double-click the Network icon within the Control Panel menu. The Network menu is
displayed.
3. Select the Protocols tab, select TCP/IP, and then click Properties. The TCP/IP
Properties menu and IP Address tab are displayed.
4. Specify an IP address window, change the IP address as applicable, and then click
OK.
5. Restart the Enterprise Manager workstation to accept and save the new IP address
configuration.
Installing the network hub
IBM provides an Ethernet hub for connecting the Ethernet cables from the TCMs and the
Enterprise Manager workstation PC. The network can be a private LAN, or part of a
public LAN.
Installing a private LAN
To install the network hub (Intel InBusiness 8-Port Hub) for a private LAN:
1. Unpack the contents of the network hub packing box.
2. Using customer-supplied Category 5 network cables with RJ-45 network connectors,
connect the following:
– SAN256N director TCM 1 to hub port #1
– SAN256N director TCM 2 to hub port #2
– Workstation network card to hub port #3
3. Attach the power module to the network hub, and then plug the other end of the
adapter into a standard AC power wall outlet.
4. Turn on the hub by pressing the Power switch located on the front panel.
5. On the front panel of the hub, each hub port with an active connection will be lit (in
this case, hubs 1, 2, and 3 should be lit).
6. Snap the cable keeper clamp into the mounting slot on the rear of the hub, and rotate
the clamp to a vertical position. Draw the network cables and power cord through the
clamp.
Installing a public LAN
To install the network hub (Intel InBusiness 8-port hub) for a public LAN: