IBM TotalStorage SAN256N Director 2045-N16, Руководство по установке и обслуживанию, Страница: 148 / 157

SAN256N Director 2045-N16
128
7. Immediately insert the IBM Product Recovery CD-ROM into the CD-ROM drive. The
workstation will locate the CD-ROM and begin the recovery program.
8. From the main menu, select the required recovery option.
9. Remove the CD-ROM, restart the workstation, and follow the startup prompts.
The system will install the Windows operating system, then automatically boot and
reboot the workstation. After the second reboot is complete, you will see the
Windows Setup screen. Use the following names as the default values:
– Name: IBM
– Company: (leave blank)
– Computer: (Use the serial number located on the front bottom right of the
workstation.)
– User: Administrator
– Password: (leave blank)
10. Using the User and Password names from step 9, logon onto the Windows
workstation.
11. Install the Windows Service Pack (latest version).
12. Restore any system drivers.
13. Restore any network configurations.
14. Set up the monitor display resolution, via the Control Panel/Display. Set the
resolution to 1280 x 1024 x 65536 Colors at 85 Hertz.
Note: The actual color and frequency settings will depend on the monitor used, and
the video display module installed in the workstation.
15. Install the Turbo TFTP for Windows software (if the workstation is used as an
Enterprise Manager and Server).
16. Install the Enterprise Manager Software Package.
17. Restore the workstation’s boot-up sequence (i.e.; floppy drive/hard drive/CD-ROM),
making sure that the CD-ROM boots-up last, after the hard drive.
Dr. Watson error
DRWTSN32.EXE is a debugger tool that runs on the Windows operating system. It
captures application errors and logs them for diagnosis and analysis. Use the following
procedure to gathering error logs after an application error has occurred.
1. To run Doctor Watson, open either a command prompt or the Run dialog box from the
Start menu, type in DRWTSN32 , and click the OK button.
2. The Dr. Watson for Windows screen should appear.
3. Highlight the last entry in the Application Errors list at the bottom of the screen. This
will be the most current error. Click the View button.
4. The Log File Viewer is displayed. Next you need to copy the text to a file.
5. Select the text and copy it to the clipboard.
– Press the
C
TRL
+H
OME
key. The mouse pointer moves to the top of the Log File
Viewer window.