IBM TotalStorage SAN256N Director 2045-N16, Руководство по установке и обслуживанию, Страница: 115 / 157

Chapter 5. Hardware maintenance procedures
95
Figure 41. NEMA L6-20P AC power plug
International (7K25) AC power plug replacement procedure (SANC40N
cabinet-International)
Use the following procedures to replace an international 7K25 AC power plug. Figure 42
on page 98 provides a visual reference.
Removing the 7K25 AC power plug
1. Power off the SAN256N director.
2. Set the customer’s circuit breakers to the Off position that supply AC power to the
SAN256N director power cord being replaced.
3. Disconnect the AC power cable to be replaced from the customer’s AC receptacles.
4. Disconnect the power receptacle end of the cord from the SAN256N power supply
AC input receptacle.
Strain relief
Orient red
tabs toward
outer portion
of connector
body
Plug body Housing
Ground
Line-2 (Y)
Line-1 (X)
Attention: Refer to safety notices before starting an installation.