IBM TotalStorage SAN256N Director 2045-N16, Руководство по установке и обслуживанию

Страница: 103 / 157

Chapter 5. Hardware maintenance procedures
83
Figure 36. TFIO blade; replacing
Removing a TFIO blade
1. At the Enterprise Manager client, go to the Navigation Tree menu and under the
Directors Link select the desired Director you will be working with.
2. Select the Board tab and then the applicable board.
3. Right click the appropriate TFIO board. This will select the board and create a drop
down menu. Select Configuration. This will display the General Tab.
4. Select Offline, then click Apply. The following dialog box will appear:
Do You Want To Set The Admin Mode?
Yes or No
5. Select Yes. The next dialog box is:
Admin mode change my take about one minute.
Are you sure you want to continue?
[Yes] [No]
6. Select Yes.
7. You will get one more dialog box that says:
Setting a board offline will disrupt existing traffic through the ports on the board.
Are you sure you want to continue?
[YES] [NO]
8. Select Yes.
TFIO Blade
Ejector / Latch
Ejector / Latch
Latch Closed
Latch Screw
Latch Closed
Latch Screw