IBM TotalStorage SAN256N Director 2045-N16, Руководство по установке и обслуживанию, Страница: 130 / 157

SAN256N Director 2045-N16
110
TFIO Port Blink Codes
Table 12. TFIO port blink codes
Error LED
Blink
Count Pattern
Error Code Description
Note: These blink codes appear on the red Error LEDs associated with the TFIO ports. The blink codes
are in decimal format with a 3 second pause between code restarts. Using 3 as an example, the
blink pattern would be: 3 blinks, followed by a 3 second pause, then restart; using 14 as an
example, the blink pattern would be: 14 blinks, followed by a 3 second pause, then restart.
0 (Fault LED is
Off) FCPORT_FAULT_NONE Normal (no failure)
1 FCPORT_FAULT_ISOLATION
_ELP_MISMATCH E-port has become isolated. ELP parameters in E-port
initialization do not match (an example could be
ED_TOV or RA_TOV mismatch).
2 FCPORT_FAULT_ISOLATION
_ZONE_MISMATCH E-port has become isolated. Zone set on the switches
connected via this E-port do not match.
3 FCPORT_FAULT_ISOLATION
_DOMAIN_MISMATCH E-port has become isolated. There is a Domain conflict
between the switches connected via this ISL. (Both the
switches have the same domain).
4 FCPORT_FAULT_ISOLATION
_RSVD_1 reserved
5 FCPORT_FAULT_ISOLATION
_RSVD_2 reserved
6 The port is looped-back (transmitter connected to
receiver) or connected to another port on the same
switch.
7 FCPORT_FAULT_INVALID_AT
TACHMENT E-port is in invalid attachment state. This happens when
the fabric security database on both the connected
switches do not match.
8 Generic blink code for fault isolation that has not been
specifically addressed by any specific fault isolation
blink code.
9 FCPORT_FAULT_ISO_CRC_I
NBOUND_TH CRC error threshold has been exceeded on this port.
Fault isolation has shutdown the port.
10 FCPORT_FAULT_ISO_DECO
DE_TH Decode error threshold has been exceeded on this port.
Fault isolation has shutdown the port.
11 FCPORT_FAULT_ISO_FRAMI
NG_TH Framing error threshold has been exceeded on this
port. Fault isolation has shutdown the port.
12 FCPORT_FAULT_ISO_SYNC
_LOSS_TH Loss of Synchronization error threshold has been
exceeded on this port. Fault isolation has shutdown the
port.
13 FCPORT_FAULT_ISO_FRAM
E_DISCARDS_TH Frame discard threshold has been exceeded on this
port. Fault isolation has shutdown the port.
14 FCPORT_FAULT_ISO_F_PO
RT_LOGI_TH F-port login threshold has been exceeded on this port.
Fault isolation has shutdown the port.