manualshive.com logo in svg

IBM DS3500, Введение и руководство по внедрению

IBM DS3500 - высокопроизводительное хранилище данных, обеспечивающее надежное и быстрое хранение информации. У Вас есть возможность загрузить бесплатно Краткое руководство по быстрому началу работы с этим устройством. Скачайте руководство на manualshive.com и начните работу с IBM DS3500 уже.

Поделиться
Скачать
background image

7914FDE.fm

Draft Document for Review March 28, 2011 12:24 pm

472

 

IBM System Storage DS3500: Introduction and Implementation Guide

The locked state will rarely be seen, that is, only when the array containing the disks have 
been moved to another DS3500 or controllers have been replaced. The drive becomes locked 
whenever the disk is powered down. The drive will remain unlocked during firmware upgrades 
or while other components are being replaced. When the drive is powered on, the status will 
be locked. If it detects a security key identifier, then it will remain locked until it has 
successfully authenticated with the DS3500 Disk Encryption Manager.

15.4.5  Hot spare drive

If a disk drive fails in the DS3500 storage subsystem, the controller uses redundant data to 
reconstruct the data on the failed drive on a global hot-spare drive. The global hot-spare drive 
is automatically substituted for the failed drive without intervention. When the failed drive is 
eventually replaced, the data from the hot-spare drive is copied back to the replacement 
drive.

Hot-spare drives must meet the array hot-spare requirements. The following drive types are 
required for hot-spare drives when secure-capable arrays are configured. If a drive does fail, 
the Storage Manager automatically determines which hot-spare drive to substitute according 
to the type of the failed drive:

򐂰

For an array that has secured FDE drives, the hot-spare drive must be an unsecured FDE 
drive of the same or greater capacity. After the unsecured FDE hot-spare drive is used as 
a spare for a failed drive in the secured RAID array, it is security enabled.

򐂰

For an array that has FDE drives that are not secured, the hot-spare drive can be either an 
unsecured FDE drive or a non-FDE drive.

򐂰

An unconfigured secured FDE drive cannot be used as a global hot-spare drive. If a global 
hot spare is a secured FDE drive, it can be used as a spare drive only in secured arrays.

15.5  Migrating secure disk arrays

This section will detail how to migrate an array with Disk Security enabled to another DS3500. 
The process consists of exporting the array on the source DS3500 and importing the array on 
the target DS3500 after the disk have been physically moved. User data remains intact on the 
disks because configuration metadata is stored on every drive in the DS3500. The export 
process is the same as an ordinary array, but there are some extra steps to be carried out for 
the locked drives of the secure array when importing. 

15.5.1  Planning checklist

This list is displayed in a window of the migration wizard (Figure 15-25 on page 474). It is 
important to follow this list when planning an export and import of an array.

On the source DS3500:

򐂰

Save the DS3500 configuration by selecting Storage Subsystem

 Configuration

 

Save.

򐂰

Back up all data at the host level on logical drives of the array.

򐂰

Ensure that all I/O has been stopped to the array, and unmap any logical drives that are 
mapped on the array, ensuring that each host no longer requires the disk presented to it by 
the array to be migrated.

򐂰

Locate the array disks on the DS3500, noting the enclosure ID and location slot of each 
disk member.

Содержание DS3500























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DS3500

B&B Electronics Elinx EIRP305-T User Manual preview
Elinx EIRP305-T
Бренд: B&B Electronics Страницы: 19
Campbell SC115 Product Manual preview
SC115
Бренд: Campbell Страницы: 32
IBM BladeCenter S Installation And User Manual preview
BladeCenter S
Бренд: IBM Страницы: 84
IBM 1402 Reference Manual preview
1402
Бренд: IBM Страницы: 80
IBM 9008-22L Manual preview
9008-22L
Бренд: IBM Страницы: 110
H3C CR16000-M Installation Manual preview
CR16000-M
Бренд: H3C Страницы: 116
IBM Ultrastar 36XP Quick Installation Manual preview
Ultrastar 36XP
Бренд: IBM Страницы: 2
Lantronix SLC8 Manager User Manual preview
SLC8
Бренд: Lantronix Страницы: 299
Speedtouch IPQoS Configuration Manual preview
IPQoS
Бренд: Speedtouch Страницы: 124
Alcatel Speed Touch 591s Technical User'S Manual preview
Speed Touch 591s
Бренд: Alcatel Страницы: 184
IBM HS21 XM BLADECENTER - L5408 FOR SPEC CPU2006 Supplementary Manual preview
HS21 XM BLADECENTER - L5408 FOR SPEC CPU2006
Бренд: IBM Страницы: 1
Sun Microsystems Sun Fire X2100 M2 Service Manual preview
Sun Fire X2100 M2
Бренд: Sun Microsystems Страницы: 128
Ubiquiti EdgeRouter ER-8 Quick Start Manual preview
EdgeRouter ER-8
Бренд: Ubiquiti Страницы: 20
German pool auto-vacuum VAC-20 Operating Instructions Manual preview
auto-vacuum VAC-20
Бренд: German pool Страницы: 16
Tenda DH301 User Manual preview
DH301
Бренд: Tenda Страницы: 120
FDiSK SecurePRO User Manual preview
SecurePRO
Бренд: FDiSK Страницы: 25
ZyXEL Communications GS-2724 User Manual preview
GS-2724
Бренд: ZyXEL Communications Страницы: 348
Integra NAS-2.3 Instruction Manual preview
NAS-2.3
Бренд: Integra Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды