manualshive.com logo in svg

IBM DS3500, Введение и руководство по внедрению

IBM DS3500 - высокопроизводительное хранилище данных, обеспечивающее надежное и быстрое хранение информации. У Вас есть возможность загрузить бесплатно Краткое руководство по быстрому началу работы с этим устройством. Скачайте руководство на manualshive.com и начните работу с IBM DS3500 уже.

Поделиться
Скачать
background image

7914support2-0209.fm

Draft Document for Review March 28, 2011 12:24 pm

362

 

IBM System Storage DS3500: Introduction and Implementation Guide

You can correct some of these conditions by using the functions accessible through the 
Subsystem Management Window. However, for some of these conditions, you might need to 
contact your IBM Customer Support representative. The storage management software 
saves the information about the firmware upgrade process in log files. This action helps the 
IBM Customer Support representative to understand the conditions that prevented the 
firmware upgrade.

Major and Minor firmware upgrades

A version number exists for each firmware file. For example, at the time of writing 07.70.16.01 
is the current version number for the DS3500 firmware file. The first two digits indicate the 
major revision of the firmware file. The remaining digits indicate the minor revision of the 
firmware file. You can view the version number of a firmware file in the Upgrade Controller 
Firmware window and the Download Firmware dialog. For more information, refer to the 
Downloading the Firmware online help topic in the Enterprise Management Window.

The process of upgrading the firmware can be either a major upgrade or a minor upgrade 
depending on the version of the firmware. For example, the process of upgrading the 
firmware is major if the version of the current firmware is 07.70.16.01, and you want to 
upgrade the firmware to a theoretical version 08.ab.cd.ef. In this example, the first two digits 
of the version numbers are different and indicate a major upgrade. In a minor upgrade, the 
first two digits of the version numbers are the same. For example, the process of upgrading 
the firmware is minor if the version of the current firmware is 07.70.16.01, and you want to 
upgrade the firmware to version 07.ab.cd.ef or any other minor revision of the firmware.

DS Storage Manager upgrade software 

There are two seperate tools included in the DS Storage Manager software to update the 
controller firmware and NVSRAM:

򐂰

The firmware upgrade tool accessed from the DS Storage Manager (Enterprise 
Management) window. This tool is able to perform staged firmware upgrades in which the 
firmware is transferred to the DS3500 but the upgrade is not applied. This tool is able to 
perform both minor firmware upgrades and major firmware upgrades. This tool is 
described in section 14.5.4, “Using the Enterprise Management upgrade tool” on 
page 363.

򐂰

The firmware upgrade tool accessed from the DS Storage Manager (Subsystem 
Management) window. In addition to the controller firmware and NVSRAM, this tool is also 
used to update the ESM and drive firmware. This tool is not able to perform either staged 
firmware upgrades or major firmware upgrades. This tool is described in section 14.5.5, 
“Using the DS3500 Storage Manager (Subsystem Management)” on page 376.

Table 14-1 on page 363 below lists the major differences in functionality between the DS 
Storage Manager firmware update tools. 

Note: The location where the firmware upgrade tool log files are saved on your system is 
reported at the top of the firmware upgrade tool View Log window. See Figure 14-38 on 
page 364.

Note: You also can use the command line interface (CLI) to download and activate 
firmware to the DS3500 storage subsystems. For more information, refer to the About the 
Command Line Interface online help topic in the Enterprise Management Window.

Содержание DS3500























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DS3500

Makita 3606 Parts Breakdown preview
3606
Бренд: Makita Страницы: 2
Lantronix UDS2100 Quick Start Manual preview
UDS2100
Бренд: Lantronix Страницы: 6
Lantronix SGX 5150 Manual preview
SGX 5150
Бренд: Lantronix Страницы: 27
Lantronix Maestro E220 Series Quick Start Manual preview
Maestro E220 Series
Бренд: Lantronix Страницы: 25
DCE ANS-205 User Manual preview
ANS-205
Бренд: DCE Страницы: 5
Ubee DVW3201B User Manual preview
DVW3201B
Бренд: Ubee Страницы: 9
process-informatik CONNECT Series Operation Quick Start Manual preview
CONNECT Series
Бренд: process-informatik Страницы: 8
SafeNet Luna SA Configuration Manual preview
Luna SA
Бренд: SafeNet Страницы: 109
IBM totalstorage 200 Service Manual preview
totalstorage 200
Бренд: IBM Страницы: 180
Apricorn Aegis NetDock Quick Start Manual preview
Aegis NetDock
Бренд: Apricorn Страницы: 4
TRENDnet TW-100 Specifications preview
TW-100
Бренд: TRENDnet Страницы: 2
Weidmuller IE-SW-VL16-14TX-2SC Hardware Installation Manual preview
IE-SW-VL16-14TX-2SC
Бренд: Weidmuller Страницы: 17
aizo digitalSTROM-Server Installation Notes preview
digitalSTROM-Server
Бренд: aizo Страницы: 2
IBM xSeries 382 User Manual preview
xSeries 382
Бренд: IBM Страницы: 56
IBM System x3350 Type 4192 Installation Manual preview
System x3350 Type 4192
Бренд: IBM Страницы: 84
Leightronix UltraNEXUS-HD Flex Product Quick Manual preview
UltraNEXUS-HD Flex
Бренд: Leightronix Страницы: 5
Broadband Products D-Link DSL-2640U Quick Installation Manual preview
D-Link DSL-2640U
Бренд: Broadband Products Страницы: 12
Avaya Aura 5300 User Manual preview
Aura 5300
Бренд: Avaya Страницы: 119

Бренды по названию

Популярные бренды

Загрузить еще бренды