Hughes HX90, Руководство по установке, Страница: 93 / 124

Chapter 8 • Troubleshooting
1039456-0001 Revision A
93
Confirming the receive signal
To confirm that the router is properly receiving satellite signals:
1. At the System Control Center, click the
Reception Info
link.
The Reception Information page appears.
2. In the Receive Status field, check the RxCode.
If the RxCode is Receiver operational (
RxCode 5
) the router is receiving signals
properly; proceed to Confirming the transmit signal on page 93.
If any other RxCode appears, the router is not receiving signals properly. Click the
RxCode
, and follow the troubleshooting procedure that appears. Click the
RxCode
for explanation of the problem and/or troubleshooting information.
Figure 70: Reception Info page
Note: The RxCode shown is an example.
Confirming the transmit signal
To confirm that the router is properly transmitting signals to the satellite:
1. At the System Control Center, click the Transmission Info link.
The Transmission Information page appears.
2. In the Transmit Status field, check the TxCode.
If the TxCode is
Transmitter Ready (RxCode 8)
the router is transmitting
signals properly; proceed to Confirming that TCP Acceleration is operational on
page 94.