Hughes HX90 Скачать руководство пользователя страница 62

Страница: 62 / 124

Chapter 5 • Completing the installation

1039456-0001 Revision A

5. Check the Software Download Status.

If it reads

All files are up-to-date

, the router has been commissioned.

6. Wait 15 minutes after completing registration for all files to be downloaded from

the NOC to the router.

7. If

All files are up-to-date

does not appear after 15 minutes, restart

the router:
a. Go to the System Control Center home page.
b. In the Help section, click

Restart HX90

8. If you do not see the All files are up-to-date message, power cycle the satellite

router:

a. Unplug the power cord from the power source.
b.

If the router is connected to a DC power source

, unplug the DC input cable

from the router’s power supply.

c. Wait 5 sec.
d. Plug the power cord back into the power source.
e.

If the power source is DC

, plug the input cable back into the power supply.

Do not power cycle the satellite router by unplugging the power cord from the
router’s rear panel. Doing so could result in static electricity discharge that could
shock you and/or damage the router.

CAUTION

Содержание HX90





























































































































Результаты поиска

Содержание HX90

Отзывы:

Hughes HX90, Руководство по установке, Страница: 62 / 124

Результаты поиска

Содержание HX90

Отзывы: