Hughes HX90, Руководство по установке, Страница: 80 / 124

Chapter 6 • System control center
80
1039456-0001 Revision A
The parameters listed on the Transmission Information page are explained in the
following table.
Table 8: Transmission Information page parameters
Parameter Explanation
Transmit Status Indicates if the transmit data path is operational. Click the displayed
TxCode for explanation of the displayed code.
Number of Successful Transmissions Number of frames transmitted to the satellite.
Number of Failed Transmissions Number of frames that could not be sent. A continuously increasing
value indicates a transmission problem. If a low value is displayed and
does not increase, and the system is functioning, there is no reason for
concern.
Number of Packets Submitted for
Transmission Total number of data packets queued for transmission to the satellite
since the router was last restarted.
Examining transmit status
You can check the Transmit Status parameter to find out if the transmission data path
is operational or if there is a problem. Normal transmit status is indicated by the
message
Transmitter ready
(
TxCode 8
).
The following two illustrations show how you can view a list of all TxCodes or see an
explanation of the currently displayed TxCode. Each TxCode—except TxCode 8
—indicates a specific problem in the transmission path.
Figure 62: Finding additional Transmit Status information