Hughes HX90, Руководство по установке, Страница: 86 / 124

Chapter 7 • LEDs
86
1039456-0001 Revision A
Table 10 explains what the router status is when the LEDs are on, off, or blinking. On
means the LED is continuously lit. Blinking means the LED is usually on, but
intermittently turns off briefly. Flashing means the LED alternates between on and
off for periods of ½ sec to 1 sec.
Table 10: Front panel LED indications
LED Appearance Satellite router status
LAN On Satellite router is connected to a computer network
card or Ethernet device
Blinking Transmitting and/or receiving data
Off No device is connected to the LAN port or the device
connected to the LAN port is not working properly
Transmit On OK - Transmit path is operational
Blinking, mostly on Transmitting data
Blinking, mostly off Ranging (The router is measuring the distance to the
satellite to calibrate transmit timing and transmit
power.)
Off* Condition preventing transmission
Receive On OK - Receive path is operational
Blinking Receiving data
Off* Condition preventing receipt of data
System On Connection established with the NOC
Blinking* Virus protection blocking data
Off* Condition preventing full operation
Power On Power is on and the router is functioning normally
Flashing Operating with fallback.bin (backup) version of
software
Blinking Router is not commissioned or has lost its
configuration data
Off* No power
Bold type indicates LED appearance during normal operation when the satellite router is transmitting or
receiving data.
*Indicates an operational problem.
If it appears the LEDs are not functioning properly, make sure you have the correct
power supply. Refer to Table 2 on page 17 for detailed power supply information.