Hughes HX90, Руководство по установке, Страница: 10 / 124

Chapter 1 • Satellite router overview
10
1039456-0001 Revision A
Scope of this installation guide
This installation guide explains how to install, commission, activate, and
troubleshoot the HX90 satellite router. It also contains certain reference information
concerning operation of the satellite router, such as troubleshooting information.
Audience
This guide is intended to be used by professional installers. It may also be useful for:
•
Trainers who train installers
•
Call center operators who respond to customers’ calls
Satellite router specifications
Table 1: Specifications for the HX90 satellite router
Weight 1.6 lb (0.73 kg)
Height 8.0 inches (20.3 cm)
Width 1.6 inches (4.1 cm); 2.4 inches (6.1 cm) at base
Depth 9.0 inches (22.9 cm)
Operating temperature range 32
°
F to 122
°
F (0
°
C to 50
°
C)
Above 5,000 ft (1,524 m) altitude, the maximum
temperature is reduced by 1
°
C per 1,000 ft (305 m).
Operating humidity range 5% to 90% non-condensing
Altitude Up to 15,000 ft (4,572 m)
Cooling method Convection
Protocol support TCP/IP (Transmission Control Protocol / Internet Protocol)
protocol suite
Supported frequency ranges Ka-band or Ku-band
Network interface ports Two RJ-45 Ethernet LAN ports supporting 10BaseT or
100BaseT operation
Power supplies and power requirements See
Power supply information
on page 15.
LAN port configuration
The satellite router’s two LAN ports support the following configurations:
•
Dual port, single subnet – Only one LAN port is configured with an IP address at
the NOC, which means the router supports one subnet. This is the default
configuration.
•
Dual port, independent subnet – Each LAN port is configured with a separate IP
address at the NOC, which means the router supports independent subnets.