Hughes HX90, Руководство по установке, Страница: 33 / 124

Chapter 4 • Commissioning the satellite router
1039456-0001 Revision A
33
Note: The following apply to the screen illustrations in this installation guide:
•
Most screen illustrations show only the relevant part of the screen and
do not include features such as browser menus, toolbars, and window
borders.
•
The screen illustrations are examples . Values shown in these illustrations
may not apply to the satellite router you are installing. Do not use values
shown to install or configure the router unless the instructions say to do
so.
•
On some screens and in some messages you may see the word terminal
or the abbreviation VSAT . Both refer to the HX90 satellite router.
•
Screen and page are both used to refer to a set of information from your
computer or satellite router that is displayed on your computer monitor.
The Configuration File Upload screen appears.
Figure 12: Configuration File Upload screen
5. Click
Browse
on the Configuration File Upload screen.
6. Navigate to the location on the installer laptop where you saved the
sbc.cfg
file.
7. Select the
sbc.cfg
file and click
Open
.
8. Click
Upload
, and wait for the upload to complete.
9. Wait to see the message shown in Figure 13, which indicates that the
configuration has been transferred to the router.