Hughes HX90, Руководство по установке, Страница: 48 / 124

Chapter 4 • Commissioning the satellite router
48
1039456-0001 Revision A
6. Click
Next
on the Receive Antenna Pointing screen.
The KA Antenna Pointing Validation screen opens, showing a summary of the
squinter pointing results.
Figure 30: KA Antenna Pointing Validation screen — final validation passed
Note: If you open the pointing validation screen before antenna pointing is
complete, a message appears (instead of the text shown in the screen
illustration above) asking you to wait until pointing is complete. The
message advises that if you exit antenna pointing without passing final
validation, the
transmitter will be disabled .
Note: The Results Saved field indicates whether you saved the pointing values or
not when the DAPT prompted
Store Results?
near the end of the
squinter pointing process.
7. This step depends on the validation test results:
•
If any validation test fails, click
Back
to restart DAPT antenna pointing; then
re-test until all tests pass.
•
If you are using satellite-based commissioning and all four validation tests
pass, click
Next
to continue.
Note: The Next button shown in Figure 30 is present only if final validation
is successful. If any test failed, only the
Back
and
Exit
buttons are
present.
•
If you are following the instructions for Ka-band manual commissioning and
all four validation tests pass , this is the last step; click
Exit
.
When all four validation tests have passed, Ka-band pointing is complete and
validated.