Hughes HX90, Руководство по установке, Страница: 83 / 124

Chapter 6 • System control center
1039456-0001 Revision A
83
Help page
The System Control Center Help page (Figure 65 on page 84) contains information to
help the user get started in using the satellite router, find contact information for
assistance, and other helpful information.
To display the Help page:
•
Click View Help Topics on the System Control Center home page.
Software Release Version of the router’s software. This is typically the factory-installed
software version. However, if the NOC downloads a newer version of
Gateway software to the router, the newer version number is
displayed.
LAN1 IP Address The satellite router address. The default router address is 192.168.0.1.
A different router address can be configured.
LAN1 Subnet Mask Range of addresses available to the satellite router.
LAN1 MAC Address MAC address for the satellite router.
LAN2 IP Address Address available for a second LAN connection.
LAN2 Subnet Mask Subnet mask (range of available addresses) available for a second LAN
connection.
LAN2 MAC Address MAC address a second LAN connection.
NAT IP Address The Internet routable public IP address assigned to the router. NAT
translates this address to local private addresses in the range
192.168.0.x that can be used by the devices on your local network
(where x = 0-9).
NAT Subnet mask The NAT subnet mask (range of available addresses) assigned to the
router is always 255.255.255.255.
Table 9: System Information page parameters — HX90 Info section (Continued)
Parameter Explanation