80
| Modes/programs/functions
PROgRAM: MANUAL
The following menu points are displayed and can be changed:
Modus: MANUELL
/ Program: MANUAL CONTROL
Relais T1 EIN/AUS
/ Relay T1 ON/OFF
Relais F1 EIN/AUS
/ Relay F1 ON/OFF
Relais T2 EIN/AUS
/ Relay T2 ON/OFF
Relais F2 EIN/AUS
/ Relay F2 ON/OFF
the switching state of the relays can be set using the
,
,
Ok
buttons.
7.7 RESET
In this menu item, all settings can be reset to factory settings (delivery status).
8. gENERAL INFORMATION
MAINTENANCE
the Professional Humidity switch PLs 1000 is largely maintenance-free. For
permanent operation, as with any safety-related device, the function must be
checked at intervals that are not dependent on the application. Check the
device for damage before each use! If you find any damage, stop operating
the device and take it to a specialist workshop.
H-TRONIC GmbH cannot be made liable for damages and / or losses of any
kind, such as single or consequential damages resulting from the fact that con-
nected devices have not functioned and / or switched, despite the detection of
humidity or temperature changes by the Professional Humidity Switch.
CLEANINg
First disconnect the device from the mains. Clean the device only with a dry
cloth, this can be slightly moistened if the device is heavily soiled. Do not use
solvent-based cleaning agents for cleaning.
MALFUNCTION
If it can be assumed that safe operation is no longer possible, the device must
Anleitung_PLS1000_DE_EN.indd 80
13.12.19 12:40
