74
|
PROCESS: SET
the following menu points are displayed:
PROgRAM: TF-SCHALTER
Temperature T1
Feuchtigkeit 1 (F1) /
Humidity 1 (F1)
Temperature T2
Feuchtigkeit 2 (F2) /
Humidity 2 (F2)
REL T1 timer
REL T2 timer
REL F1 timer
REL F2 timer
Einstellungen (nur lesend) … /
Settings (read only) …
The parameters have the following functions:
Temperature T1
Currently measured temperature at the indoor sensor (degrees Celsius)
Moisture F1
Measured relative humidity at the interior sensor (RH)
Temperature
T2
Currently measured temperature at outdoor sensor (degrees Celsius)
Moisture F2
Measured relative humidity at outdoor sensor (RH)
REL T1 timer
the switch-on delay ReL t1 delay entered in the process: setting can be viewed
in this menu item and shows the remaining time from reaching the set setpoint
values until switching.
REL T2 timer
the switch-on delay ReL t2 delay entered in the process: setting can be viewed
in this menu item and shows the remaining time from reaching the set setpoint
values until switching.
Modes/programs/functions
Anleitung_PLS1000_DE_EN.indd 74
13.12.19 12:40
