54
| Menu
The symbols displayed on the right in the LC display have the following meaning:
the first menu item; only scrolling down is possible
scrolling up or down is possible
the last menu item; only scrolling up is possible
SETTINg PROCESS
In the setting process you can select the changeable parameters with the help
of the keys p, q, select with the
Ok
key. With the keys
,
you can now set
the desired value and confirm with the oK key. With the
ESC
key you can leave
the selected parameter or mode.
PROCESS: EINSTELLEN
/ SETTINg PROCESS
PROCESS: STEUERN
/ CONTROL PROCESS
With the
ESC
key you can leave the setting process and switch to the control
process with the keys
,
and start the programmed mode.
CONTROL PROCESS
In the control process you can display the current measured values, depending
on the selected mode. You switch between the parameters by using the keys
,
.
If you exit the control process with the
ESC
key, the current mode is interrupted.
the set values in the programming process are retained. By switching back to
the control process, the programmed mode is reactivated.
7. MOdES / PROgRAMS / FUNCTIONS
The PLS 1000 has 6 different functions with which different humidity and tempe-
rature controls can be programmed. Room fans for supply and exhaust air can
be controlled directly via 4 integrated potential-free relays. The moisture sensors
TH-1 included in the scope of delivery are identical and can equally be used as
indoor sensor or outdoor sensor, depending on the desired function.
Anleitung_PLS1000_DE_EN.indd 54
13.12.19 12:40
