HP P9000, Справочное руководство

Страница: 201 / 399

NOTE:
•
Do not execute the
YKDELETE
command during planned outage operation (when switching
the P-VOL and S-VOL). To dissolve the copy pair, switch the P-VOL and S-VOL again, return
the P-VOL to the primary site (restore normal operation), and then dissolve the copy pair.
•
When operating the copy groups of a copy pair that was deleted with the
DEVN
parameter,
for the time that the copy pair is being synchronized, be sure to specify the
SELECT(COND)
parameter.
•
For CG containers specified by EXCTG ID, if you execute the
YKDELETE
command and then
the
YKQUERY
command to obtain the copy pair status, the
YKZ296E
message sometimes
appears when the dissolving of the copy pair is detected at a different time from the dissolving
of EXCTG, but this does not mean that an error has occurred. However, for CG containers
specified by EXCTG ID, HP recommends that you execute the
YKDELETE
command and then
the
YKEWAIT GOTO(SIMPLEX)
command, wait until the copy pair status changes to SIMPLEX,
and then execute the
YKQUERY
command.
Return Codes
Table 106 (page 201) lists the return codes to be returned when the
YKDELETE
command terminates.
Table 106 YKDELETE Command Return Code List
Meaning Return Code
The command terminated abnormally, possibly because the user SVC routine has
not been included properly.
4095
to
-4040
The module cannot be loaded. Possible causes are as follows:
•
The library dataset has not been linked.
•
The module is protected by the RACF program control function.
-3
An interruption occurred during execution.
-1
The command completed normally.
0
•
I/O errors were encountered.
•
A change in an I/O configuration definition was detected.
32
Invalid or missing data in a REXX variable.
36
An error occurred while a REXX variable was being written.
40
Terminating due to processing errors.
44
Terminating due to invalid parameters. This return code appears, for example,
when the copy pair corresponding to the device number specified with the
DEVN
parameter is not found.
48
The command terminated abnormally. The user does not have permission to execute
this command. 128
YKDELPTH Command
Applies to PTH.
Format
YKDELPTH
1
STEM(stem-name-1)]
1
MSG(stem-name-2)
[
1
PSN(storage system-serial-number)[
1
PCU(cu-number)]]
[
1
SSN(storage system-serial-number)[
1
SCU(cu-number)]]
Command details 201