HP P9000, Справочное руководство

Страница: 14 / 399

Table 2 Commands that Can Be Used on the Command Line
Command Name Panel Name
ERRCODE SCANPAIR SORT SELECT LOCATE
Y — Y
1
— Y Browse Copy Group Pair Detail
Y — Y
1
— — Copy Group Detail Definition
Y — Y
1
— Y Copy Group Pair Detail
Y — Y Y Y Copy Group Pair Status
Y Y — — — Copy Group Selection List
Y — Y Y Y Define Command Device
— — — — — Error Code Help
Y
2
— — — — Exception Message Panel
Y — Y Y Y Manage Copy Groups
Y — — Y — Pair Selection List (Primary)
Y — — Y — Pair Selection List (Secondary)
Y — Y
1
— — Path Set Detail
Y — Y
1
— — Path Set Status
Y — Y
1
— — Path Set Status of Copy Group Pair
— — — — — Setting Information
Y — Y — Y
Hitachi TrueCopy™ Asynchronous
for Mainframe Copy Group
Performance Statistics
Y — Y — Y Continuous Access Journal for
Mainframe Copy Group
Performance Statistics
Y — — — — Others
1 This command can be used, but you cannot specify field names.
2 Pressing the F5=ErrCode key will also execute the command.
Legend:
Y: Can be used
—: Cannot be used
ISPF Settings
Setting the Position of the Command Line
You can specify whether to position the command line at the top or at the bottom of each panel.
To set the position of the command line:
1. Start Business Continuity Manager. Type
SETTINGS
on the command line, and then press
the Enter key.
The ISPF Settings panel appears.
2. To display the command line at the top of panels, clear the Command line at bottom check
box. To display the command line at the bottom of panels, select the Command line at bottom
check box.
14 ISPF Panels