HP P9000, Справочное руководство

Страница: 110 / 399

Table 70 Contents of the Manage Path Set Panel
Description Item
Specify an action. AC
•
l
: Executes the
YKLOAD
command and loads a path set.
•
b
: Executes the
YKBLDPTH
command, and establishes all logical paths in the selected
path set.
•
d
: Executes the
YKBLDPTH
command, and deletes all logical paths in the selected
path set.
•
q
: Executes the
YKQRYPTH
command, and displays the status of all logical paths in
the selected path set. The Path Set Status panel will be displayed.
•
c
: Executes the
YKQRYPTH
command with the
RESTRUCT
parameter specified.
When actions are entered in multiple AC columns, the actions are carried out in the order
displayed.
Path set ID Path Set ID
Execution result of the action specified for AC Status
•
NOT LOADED
: the path set has not been loaded.
•
LOAD ERROR RC=
xx
1
: An error occurred during loading the path set.
•
LOADED WITH WARNINGS RC=
xx: The path set has not been loaded, but with
warnings.
•
LOADED
: Loading the path set was successful.
•
Action-name
SUCCESSFULLY
: The action indicated by action-name was successful.
•
Action-name
WARNINGS
command-name
RC=
xx: A warning occurred with the
command indicated by command-name, in the action indicated by action-name.
•
Action-name
WITH WARNINGS
command-name
RC=
xx: The command indicated by
command-name within the action indicated by action-name generated an error
message.
•
Action-name
ERRORS
command-name
RC=
xx The command indicated by
command-name terminated with an error.
1 xx is a return code from each command.
NOTE: Status displays the execution result of the action specified for AC . If you specify
q
for AC ,
then the
YKQRYPTH
command is executed, and the status of each logical path that has been defined
in the path set is displayed in the Path Set Status panel. If you press the F3=Exit key to exit the Path
Set Status panel, Status in the Manage Path Set panel displays the execution result of the
YKQRYPTH
command that was executed to display the Path Set Status panel.
Executing YKLOAD
When
1
is specified for the AC column in the Manage Path Set panel, the
YKLOAD
command (for
loading a path set) is executed. At this point, the LOAD Option panel is displayed for specifying
parameters for the
YKLOAD
command.
Figure 95 (page 111) shows the LOAD Option panel when a path set is loaded.
110 ISPF Panels