HP P9000, Справочное руководство

Страница: 376 / 399

Example 2 Example
The following is an example of the STATUS parameter:
STATUS=SUSPOP,ACTION=RESYNC(SICG,0,’FORWARD’); EXIT(64);
NOTE:
•
If a specified value contains a comment symbol, enclose the entire value in single quotation
marks. For example, to set the value #CG1 for CGID, specify the following value:
CGID=’#CG1’
•
When a CLI command is executed, the
SELECT(COND)
parameter is the default value.
However, in the case of the
YKSUSPND
command,
SELECT(ALL)
is the default value.
•
If the attempted action fails, summary information about the copy group will be output
regardless of the specified message level.
•
If you specify parameters for a single copy group without grouping them by the target status,
actions are grouped by the target status. The following is an example of when parameters
are not grouped together by the target status.
376 BCM Monitor Parameter Files