HP P9000, Справочное руководство

Страница: 151 / 399

Table 82 Contents of the Volume Query Information (CAA) Panel (continued)
Description Item
CCA of the volume which
makes a copy pair CCA
Device number of the volume
which makes a copy pair DEVN
1 It is not displayed when the
YKQRYDEV
command has been executed for the HP StorageWorks XP1024/XP128 Disk
Array.
2 For details about the status of the displayed copy pair, see the table (for CA/CAA) that shows the copy pair statuses
of volumes obtained by using the
YKQRYDEV
command, in the HP StorageWorks P9000 for Business Continuity
Manager Software User’s Guide. Note that when the device is a command device of either of the following models,
CDEV(
apid
)
is displayed in the Status column (apid: APID):
•
HP StorageWorks XP12000/XP10000 Disk Array
•
HP StorageWorks XP24000/XP20000 Disk Array
3 If the emulation type of the journal volume is OPEN,
JOURNAL
is not displayed.
4 The timing for when the defined values are reflected is as shown in Table 56 (page 79) , in the item When effective.
5 It is displayed if P-VOL or S-VOL is shared with other copy pairs in the definition (for example, in a 1:n BC copy pair
configuration or when S-VOL for CAA is used as P-VOL for BC).
6
MISMATCH
might be displayed. This happens when the device information during definition, as indicated by Primary
Volume and Secondary Volume , differs from the device information reported by the storage system. In this case, the
device information reported by the storage system is displayed in the Pair Volume column. If
MISMATCH
is displayed,
check the configuration file used, as well as the actual storage system configuration information settings.
NOTE:
•
If the copy type in the definitions differs from the actual copy type, the Volume Query
Information panel for the actual copy type is displayed.
•
In the following cases,
N/A
is displayed for the device information:
◦ When the
YKQRYDEV
command returns an error
◦
When displaying information about a device of a remote storage system if the route list
has not been loaded or the target storage system is not included in the route list
Volume Query Information (CAJ) Panel
If you specify
q
in AC on the Copy Group Pair Status panel, the
YKQRYDEV
command is executed
on the P-VOL and S-VOL, and the Volume Query Information (CAJ) panel is displayed for a CAJ
copy pair.
Figure 115 (page 152) shows the Volume Query Information (CAJ) panel.
Manage Copy Groups Panel (Copy Group Operation) 151