HP P9000, Справочное руководство

Страница: 106 / 399

Table 68 Contents of the Command Device Status Panel (continued)
Description Item
APID
1 1
•
Displays
Notset
if it is not registered as a command device to the storage
system.
•
Displays
N/A
if it is the HP StorageWorks XP1024/XP128 Disk Array.
APID
Copy pair information
1 2 1, 2
Displays
SIMPLEX
when the copy pair information does not exist.
Displays
JOURNAL
for the journal volume.
Copy Pair Information(s)
Copy type (either
BC
,
CA
,
CAA
, or
CAJ
) Type
Serial number of the storage system to which the P-VOL belongs SN P-VOL
SSID to which the P-VOL belongs SSID
The number of the CU to which the P-VOL belongs CU
CCA to which the P-VOL belongs CCA
Copy direction Dir
Serial number of the storage system to which the S-VOL belongs SN S-VOL
SSID to which the S-VOL belongs SSID
Number of the CU to which the S-VOL belongs CU
CCA to which the S-VOL belongs CCA
Copy pair status (see the table about the P-VOL/S-VOL status and copy pair
status in the HP StorageWorks P9000 for Business Continuity Manager Software
Users Guide. Status
1 If the information cannot be obtained,
N/A
is displayed.
1
2 If the target volume is related to another volume as a copy pair, and not as a command device, the pair relationship
is displayed.
NOTE:
•
If the
YKQRYDEV
command is executed on the HP StorageWorks XP1024/XP128 Disk Array,
N/A
will be displayed as the command device information (APID).
•
Volume information cannot be obtained when the command device on the remote site has not
been registered (the
YKBLDCMD
command has not been executed). In this case, if you execute
the
YKQRYDEV
command, an I/O error will occur, and
N/A
will be displayed for all items in
the Command Device Status panel.
Executing YKBLDCMD
When
b
is specified in the AC column in the Route Status panel, the
YKBLDCMD
command is
executed to register a command device to storage system. The Confirm Command Device Build
panel (see
“Confirm Command Device Build Panel” (page 176) ) will be displayed.
When registering a command device, perform the settings in order, starting from the primary site
and progressing towards the more distant site (in the order in which they are defined in the route
list).
If
b
is specified for multiple AC s in the Route Status panel, they will be processed sequentially from
the top of the list.
106 ISPF Panels