HP Designjet 330, Руководство пользователя

Страница: 144 / 184

This is the magenta on page 9–14 (seq: 144)
350C
350C
9–14
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 9–14 (seq: 144)
This is the black on page 9–14 (seq: 144)
If there are jagged vertical or horizontal lines
If problem is only with vertical black or gray lines, run the Black Cartridge
Alignment Procedure, explained on page 5–3.
If problem is with any other color or orientation, run the Color Cartridge Test
Procedure, explained on page 5–7.
If there are slightly warped lines
The media itself may be warped. This can happen if it has been used or stored
in an extreme environment. For all environmental specifications, see page
10–5.
If there are color “shadows”
In the example on the left, a magenta “shadow”, which is not part of the drawing,
appears at the edge of a blue object.
The cartridges need to be re-aligned. Run the Color Cartridge Test Procedure,
explained on page 5–7.
If a cartridge is not printing at all
Look to see if the cartridge is out of ink. See page 7–2.
Try priming the cartridge to clear the nozzles. See page 7–7.
If it is still not printing, remove the faulty cartridge and check the print nozzles
to make sure the protective tape has been removed.
Troubleshooting
Solving print quality problems
Localization Note. JKCT: Very similar to Parrot UG p4-12. FIGSP: Very similar to Loquillo
750C UG p9-18.