Honeywell AlarmNet GSMBR Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 64

Honeywell AlarmNet GSMBR Скачать руководство пользователя страница 37

Section 3: Programming

3-21

Programming for Zone Trigger, 4204 and Two-4204 Modes

PROMPTS

ZONE

TRIG.

4204/

2-4204 ENTRY

OPTIONS

DESCRIPTION

only when the parameter is changed back to
“Auto Detect”.

77

Review? Y/N

[Y] = review
[N] = exit

Reviewing Programming Mode Entries

To review the programming options (to ensure

that the correct entries have been made), press
[Y]. The programming prompts are displayed

again. Use the up/down arrow keys to scroll

through the program fields without changing
any of the values. If a value requires change,

simply type in the correct value. When the last

field is displayed, the “REVIEW?” prompt again
appears.

To exit the programming mode

, press [N] in

response to the "REVIEW?" prompt, and refer to

Exiting Programming Mode

below.

Setting Factory Defaults

To reset the programming options to factory-default values, press [ESC] at the "Exit Prog

Mode?" prompt.

Set Default?
Y/N_

Press [Y] to reset factory default values.
Press [N] to cancel this function.

If you press [Y], all programmed values are reset to the original factory settings. PLEASE

NOTE THAT THIS WILL ERASE ANY PASSWORD THAT MAY HAVE BEEN ENTERED.
After pressing [Y], the Create Password prompt appears (see Prompt 4).

Exiting the Programming Mode

To exit the programming mode, press [N] in response to the "Review?" prompt. Then press

[Y] to the "Exit Prog Mode?" prompt. Upon exiting, the root file is updated to log the changes

made. A message is displayed telling the user that this step is being executed. When
complete, the message "DONE" is displayed to indicate the file was successfully uploaded.

If critical configuration changes were made, such as the mode of operation, the
communications module will reset to ensure that the programming features are
enabled.

If the file is not successfully uploaded, one of the following prompts will be displayed. Follow

the steps shown below until the upload is successful.

Display

Description

What to do

Cannot Upload
Try Again? Y/N_

Module is not yet initialized.

Wait for RSSI indicator LEDs to be lit.
Press [Y].

Failed to Update
Root File!

Network problem, or you
answered "N" to "Cannot

Upload Try Again?" prompt.

Initiate the Force Server Update
Command by pressing the [0] key; refer to

Section 5: Programmer Keyboard Commands.

«
...
35
36
37
38
39
...
»

Содержание AlarmNet GSMBR

































































Отзывы:

Нет отзывов