Hofmann Megaplan Service Manual megaline SSENCE
SSENCE 400/600
Page 10 of 52
2.2.4 Exchange of the steel rope of camera bar (400 and
600)
The camera bar of the SSENCE 400/600 is moved by a stepper motor (600 and 400M) or
manually (400) in height. In the status column, a heavy counterweight (ca. 28kg),
representing the compensation for the weight of the camera bar. In all devices the same steel
cable is built in to move the bar.
The steel cable must be checked at every service of the machine. Please also
appeal to the end user to call the service if the cable is damaged. A tear rope
can cause significant damage and / or injury.
There are two variations of the rope:
-Connection with threat bolt - Material regular steel
ATTENTION!!! URGENTLY
EXCHANGE THIS CABLE !!!
-Connection with adapters - Material stainless steel
2x
Adapter
(Ab 01/2013 in all maschines.)
Exchange of the rope
- unscrew and lay down the vertical bar. (Be sure that it will not slip away)
- Dismount cover of the motor (400M and 600) or of the deflection roller (400)
- Move camera bar in upper position - dismount rope
- Dismount motor or deflection roller
- pull out the counterweight with the rope- dismount old rope.
- screw the adapter pieces into counterweight and horizontal bar. (at least 8 rotations and fix it
with the counter nut).
- connect rope and adapters with delivered screws.
- Build in motor or deflection roller, push camera bar to the bottom of vertical bar.
- Take care that the rope is correct on the pulley.
- Please lift the horizontal bar slowly (because of the counterweight).
- Fix it on the floor again
