Hofmann Megaplan Service Manual megaline SSENCE
SSENCE 400/600
Page 29 of 52
4.3 Calibration data
Calibration data of the machine are the following:
Target data:
Camera data
These data are stored in D:/SSENCE and are urgently necessary to execute the program.
Each machine is pre calibrated in manufacturers company. A backup of these important files is
stored in D:/ in a folder names with serial number. Please do not erase this folder.
If calibration data are lost for any reason, please send us the serial number of
the complete system. We have a backup of all the camera- and target files here,
so we can send you the original files coming from the factory.
After restoring of the data it is not necessary to make a calibration of the
machine.
4.4 Backup of collected alignments, customized cars and user data
There is no particular data backup included in the program. Basic alignment program and
database can be installed again within a few minutes over the internet.
There is only one file in the system where all the user data are included:
- customized cars (added by user)
- all saved alignments
- all data of the users customer.
All these data are stored in one database. This is stored in: D:/SSENCE/DB/H3D.MDB
We recommend to make a regular backup on a USB-stick.
