HNC Electric HV480 Series, Руководство пользователя

Страница: 116 / 179

112
2: acceleration and deceleration time of the second group
3: acceleration and deceleration time of the third group
4: the fourth group of acceleration and deceleration time
FB - 63 2nd motor torque boost 0.0 % ~ 30.0 % [model determination]
Same as F3 - 01 torque boost function of the first motor.
FB - 64 second motor oscillation suppression gain 0 ~ 100 [model determination]
Same as F3 - 11 oscillation suppression function of the first motor.
FC Group multi-segment instruction and simple PLC function
HV610 multi-segment instruction has more abundant functions than usual multi-segment speed. Besides
realizing multi-segment speed function, it can also be used as a voltage source for VF separation and a given source
for process PID. For this reason, the dimension of the multi-segment instruction is a relative value.
The simple PLC function is a multi-section speed generator. The frequency inverter automatically numbers the
running frequency and direction according to the running time to meet the technological requirements. The function
was previously completed by the PLC (programmable controller) and now depends on the frequency inverter.As
shown in figure 5 - 31.
Figure 5 - 31 simple PLC operation diagram
In fig. 5 - 31, a1 ~ a15 / D1 ~ d15 are the acceleration and deceleration times of the stage where they are
located, while f1 ~ f15 and t1 ~ t15 are the set frequencies and stage operation times of the stage where they are
located.
FC-00 Multi - segment instruction 0 -100.0%
～
100.0%
【
0.0%
】
FC-01 Multi - segment instruction 1 -100.0%
～
100.0%
【
0.0%
】
FC-02 Multi - segment instruction 2 -100.0%
～
100.0%
【
0.0%
】
Plc operation
D0 or relay
Plc cycle completion instruction
250ms