HNC Electric HV480 Series, Руководство пользователя

Страница: 21 / 179

17
3.3 key function description
Key Key name Functionalities
Menu key
Enter or exit the first-level menu and view the function
sequence code
Set key
Enter the menu screen step by step and set parameters
for confirmation
Menu mode select key
Switch different menu modes according to F0 - 43
median value ( the default is a menu mode )
Shift key
Under the shutdown display interface and the operation
display interface, the display parameters can be
selected according to the loop. When modifying a
parameter, you can select the modification bit of the
parameter.
Multifunction selection
key
According to F0 - 07, function switching can be defined
as command source or fast direction switching.
Run key
When it is set to keyboard control, forward rotation
operation instruction will be issued to start the
frequency inverter operation.
Stop / reset key
When running, pressing this key can be used to stop the
running operation. When the fault alarm is on, it can be
used to reset the operation. And the characteristics of
the key are restricted by the function code F0 - 08.
Increment key Increment of data or function code
Descending key Decrements of data or function code
3.4 Methods of checking and modifying function codes
The operation panel of this series of frequency inverters uses a three-level menu structure to set parameters
and other operations.
The three-level menus are: function parameter group (I - level menu) → function code (II - level menu) →
function code setting value (level III menu).
Description: press PRG key or enter key to return to the level II menu when operating the level II menu. The
difference between the two is: press enter to save the setting parameters and return to the secondary menu, and
When flashing, press

/

/

to modify
Level I menu
(Function code group
number selection)
Toggle
Enter
Enter
Enter
Give up
Save
Return
Next function code
serial number
Level III menu
(Function code parameter
value setting)
Level II menu
(Function code serial
number selection)
Return
State parameter
(Default screen)