Hioki MEMORY HiCORDER 8855, Инструкция по эксплуатации

Страница: 93 / 264

73
────────────────────────────────────────────────────
4.5 Setting the Auto Save Function
────────────────────────────────────────────────────
Function
display Meaning
: Auto save is disabled.
: Automatically stored on floppy disk
: Automatically stored on PC card.
: Automatically stored on MO/HD.
: Automatically stored on external MO connected SCSI
device.
: Automatically stored on LAN-connected device.
(Optional 9333 LAN Communicator is required.)
Function
display Meaning
: Data are stored as binary data.
: Data are stored as text data.
(Nyquist cannot be saved in the text format)
Function
display Meaning
: When the media becomes full, automatic storage
stops.
: When the media becomes full, old files are deleted to
make room for automatic storage.
4.5 Setting the Auto Save Function
The FFT analysis is carried out and measurement data are automatically
stored on a floppy disk, PC card, MO connected SCSI, or built-in MO/HD
device after they are captured. The Auto Save function stores a file in the
directory currently selected on the file screen. See Quick Start Section
10.13.2.
Procedure
Screen: STATUS
1. Press the
STATUS
key to display the STATUS screen.
2. Move the flashing cursor to the
Auto Save
item.
3. Use the function keys, select the media for auto saving.
4. Move the flashing cursor to
type
, and select the format.
Data stored in the text format is not readable by the 8855.
5. Set the file name. For the input method, refer to Section 5.4.3.
When using auto-save, a number is appended to the name you specify as the
file name. This then becomes the file name. If you start procedures before
specifying a file name, AUTO is automatically enabled.
6. Set whether or not to create a new directory when saving.
7. Move the flashing cursor to
method
, and select the format.
With the binary format selected, the file with the extension 'FFT' is deleted.
With the text format selected, files with the extension 'TXT' are deleted.