Hioki MEMORY HiCORDER 8855, Инструкция по эксплуатации

Страница: 197 / 264

177
────────────────────────────────────────────────────
10.1 Printout of Measurement Data Operating Procedure
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Print
format
Printer
PRINT
select
Printing
Press the SYSTEM key to make the
settings on the SYSTEM screen.
See Quick Start Section 9.4.
Settings on the SYSTEM screen
Manual print This mode serves to print waveform data
from the internal memory.
Auto print Printout is carried out automatically after a
waveform has been captured for the
specified recording length. (MEM)
Real-time print The input waveform and data are printed
out continuously in real time. (REC)
Partial print This function prints the waveform between
the A and B cursors (vertical or trace
cursors).
Screen hard copy The display contents of the all screens can
be printed out as is.
List print The settings for the various functions
made with the Status screen, Channel
screen etc. can be printed out in list
format.
Report print This function prints the waveform range
shown on the display, upper-lower value,
analog channel along with the active
settings.
Waveform Setting the smooth print
Smooth-print yields a smooth-
looking waveform printout, but
printing speed is reduced.
Numerical value
Setting the print interval
When using numerical values,
set the printing intervals.When
the printing interval is longer
than the recording length, it
prints only the first point.
Grid type
Channel marker
Time value
List & gauge
Printer density
Upper/lower limit value (Upper Lower Print)
Zero position comment
Counter print
Numerical calculation (MEASURE) setting
PRINT key setting
Time axis magnification/compression
(Mag/Comp)
Print size
You can select the printing area and type.