Hioki MEMORY HiCORDER 8855, Инструкция по эксплуатации

Страница: 25 / 264

5
────────────────────────────────────────────────────
1.2 Identification of Controls and Indicators
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
1
F1
to
F10
key
Serve to select setting items.
2
HELP
key
Provides on-line help.
3
CHAN
key
Causes the display to show the Channel screen which serves for making
input channel settings.
4
DISP
key
Causes the display to show measurement and analysis results.
5
FILE
key
Causes the display to show the File screen which serves for reading, storing,
etc. the waveform data etc.
6
TRIG
key
Causes the display to show the Trigger screen. Setting the trigger functions.
7
STATUS
key
Causes the display to show the Status screen which serves for setting most
measurement parameters.
8
TIME/DIV
key
Serves to set the speed for inputting and storing the input signal.
9
SYSTEM
key
Causes the display to show the System screen. Makes all the settings of
common functions, such as the initial settings and various other settings.
10
PRINT
key
Serves to print out stored waveforms.
11
COPY
key
Serves to print out a hard copy of the current screen display.
12
FEED
key
Causes the printer paper to advance for as long as the key is pressed.
13 CURSOR
key
These keys serve to move the flashing cursor in the four directions.
14
SAVE
key
Saves the data on the specified media.
15
AUTO
key
Pressing this key activates automatic setting of time axis range and voltage
range values of input waveform.
16 VALUE
key
Uses to select the numerical values setting.
17
WAVE
key
Uses to select the the waveform scrolling.
18
SHUTTLE
Rotary control knob that serves to change values, move the A/B cursors,
and scroll the waveform.
19
JOG
Concentric ring that serves to change values, move the A/B cursors, and to
scroll the waveform. The speed of movement is proportional to the rotation
angle.
20 A.B CSR
key
Uses to select the the A/B cursor moving.
21
RANGE
knob
Sets the measurement range for the channel.
22
STOP
key
Stops measurement and analysis.
Pressing this key twice stops measurement.
23 START
key
Initiates the measurement and analysis. During measurement, the LED
above the key is lit.
24
POSITION
knob
Sets the zero position for the channel.
25 Channel select
keys
Selects channel.
26
ESC
key
Exits the Input or Set up screen.