Hioki MEMORY HiCORDER 8855, Инструкция по эксплуатации

Страница: 62 / 264

42
────────────────────────────────────────────────────
3.5 Settings on the Waveform Display Screen (REC&MEM)
────────────────────────────────────────────────────
1 4
6 5
2
3
Setting items Selection Explanation
1. Function
MEM, REC, FFT,
REC&MEM
Select function.
2. Trigger mode
(recorder waveform)
SINGLE, REPEAT,
TIMER
Select trigger mode.
3. Pre-trigger
(memory waveform)
0 to 100%, -95%
Set the Pre-trigger.
4.
Time Axis Range
10 ms/DIV to
1 h/DIV (REC)
10
µ
s/DIV to
5 min/DIV (MEM)
Set the speed for inputting and
storing the waveform of the input
signal.
Time axis range setting expresses
the time for 1 DIV.
5. Magnification
/compression
along the time axis
x 1 to x 1/500 (REC)
x 10 to x 1/10000
(MEM)
By magnifying the waveform,
detailed observations can be made.
By compressing the waveform, an
entire change can be promptly
apprehended.
6. Recording Length SELECT:
30 DIV to continuous
(REC)
30 DIV to 20000 DIV
(MEM)
ARBITRARY:
1 DIV to 10000 DIV
(REC)
1 DIV to 20000 DIV
(MEM)
Using channels: 8 ch
Capacity: 32 M words
The length of recording for one
measurement operation (the number
of DIV) can be set.
Input channel settings Analog input
Logic input
Press the
F9 (CH.SET)
key on the
Waveform display screen to make
settings for the input channel on
the display. For details, see section
5.6.
Trigger settings Analog trigger
Press the
F9 (CH.SET)
key on the
Memory waveform display screen
to make trigger settings on the
display. For details, refer to Quick
Start chapter 7.
Level monitor function Press the
F8 (LEVEL
MONITOR)
key on
the Waveform display
screen.
Refer to Quick Start Section 8.5.
VIEW function Press the
F7 (VIEW)
key on the Waveform
display screen.
Refer to Section 8.1.