Hioki MEMORY HiCORDER 8855, Инструкция по эксплуатации

Страница: 26 / 264

6
────────────────────────────────────────────────────
1.2 Identification of Controls and Indicators
────────────────────────────────────────────────────
1 2 9 3 4 5 6 7 8 10 11 12 13 14 15 16 17
18 19 20 21 22
23
Right Side Panel
1 AC power switch
Switches on or off the AC power supply.
2 AC connector
The supplied power cord must be plugged in here.
3 Function ground
terminal (GND)
Connects to the earth.
4 External sampling
terminal
Allows input of an external sampling signal. (in the Memory
function)
5 Trigger terminals
Can be used to synchronize multiple instruments, using the EXT
TRIG input and TRIG OUT output.
6 PC card slot
Inserts the PC card.
7 Logic probe connectors
Input connector for the logic input section, designed for the
dedicate logic probes (CH A to D).
8 Eject button
Removes the PC card.
9 External output terminal
Various output signals can be selected, such as the BUSY or error
signals.
10
NG evaluation output
terminal
When NG results from the numerical calculation evaluation and
waveform evaluation, a signal is output from this terminal.
11 GO evaluation output
terminal
When GO results from the numerical calculation evaluation and
waveform evaluation, a signal is output from this terminal.
12
Ground terminal (GND)
Uses with
9
to
14
(except
12
) terminals.
13 External stop terminals
Stop operation can be controlled.
14 External start terminals
Start operation can be controlled.
15 Key lock
Locks the operation of keys.
16
SCSI connector
An MO drive can be connected.
17
LAN connector
Can be connected to a network through a LAN.