Hioki MEMORY HiCORDER 8855, Инструкция по эксплуатации

Страница: 231 / 264

APPENDIX 9
────────────────────────────────────────────────────
Appendix 3 Reference
────────────────────────────────────────────────────
Appendix 3.5 Averaging Equations
Appendix 3.6 "2-point method" Scaling Equation
For time axis averaging in memory functions, summing averaging is
synchronized by the trigger.
If trigger synchronization is not performed, the results will be meaningless.
Summing averaging
Captured data are added sequentially and the sum is divided by the number
of samples.
An = { (n - 1)An - 1 + Zn } /n
n
Averaging count
A
n
Result of n times averaging
Z
n
n-th measurement data
Exponential averaging
Most recent data are given greatest weighting, and the weighting of older
data is reduced with an exponential function.
An = { (N - 1)An - 1 + Zn } /N
N Specified averaging count
n
Averaging count
A
n
Result of n times averaging
Z
n
n-th measurement data
Y ={(SCH - SCL)/(VH - VL)} x + {(VH x SCL - VL x SCH )/(VH - VL)}
VH: Voltage high point
SCH: Scaling high point
VL: Voltage low point SCL: Scaling low point
The ranges for the parts enclosed in dotted lines are as follows.
-9.9999E+9 <= { }value of enclosed part <= -1.0000E-9
-9.9999E+9<= { }value of enclosed part = 0
+1.0000E-9 <= { }value of enclosed part <= +9.9999E+9
When a setting outside of the above range is attempted, a warning indication
is given and the setting becomes "converted value" = "voltage value" (no
scaling).
For channels in which waveform processing result data are recorded, only
the unit is valid (scaling is invalid).
The scaling value is used for the gauge scale, upper and lower display limits,
and for A/B cursor readings.