Hioki MEMORY HiCORDER 8855, Инструкция по эксплуатации

Страница: 17 / 264

ix
────────────────────────────────────────────────────
Notes on Use
────────────────────────────────────────────────────
CAUTION
Installation Enviroment
This instrument should be installed and operated indoors only,
between 5 and 40
and 30 to 80% RH. Do not store or use the
instrument where it could be exposed to direct sunlight, high
temperature or humidity, or condensation. Under such conditions,
the instrument may be damaged and insulation may deteriorate so
that it no longer meets specifications.
Storing (when the 8994 PRINTER UNIT is installed)
When the product is not to be used for an extended period, set the
head up/down lever to the "head up" position. This will protect the
printer head and prevent deformation of the rubber roller.
Precautions on carrying this equipment
The terminal guard of the equipment protects the inputs. Do not
hold this guard when carrying the equipment. To carry this
equipment, use the handle. See Section 1.2.
Shipping
Remove the printer paper from the product. If the paper is left in
the product, paper support parts may be damaged due to
vibrations. (when the 8994 PRINTER UNIT is installed)
To avoid damage to the instrument, be sure to remove the input
modules, floppy disk, MO disk, PC card, and SCSI cable before
shipping.
Use the original packing materials when reshipping the instrument,
if possible.
Handling the CD-R
Always hold the disc by the edges, so as not to make fingerprints
on the disc or scratch the printing.
To write on the disc label surface, use a spirit-based felt pen. Do
not use a ball-point pen or hard-tipped pen, because there is a
danger of scratching the surface and corrupting the data. Do not
use adhesive labels.
Do not expose the disc directly to the sun's rays, or keep it in
conditions of high temperature or humidity, as there is a danger of
warping, with consequent loss of data.
To remove dirt, dust, or fingerprints from the disc, wipe with a dry
cloth, or use a CD cleaner. Always wipe radially from the inside to
the outside, and do no wipe with circular movements. Never use
abrasives or solvent cleaners.
Hioki shall not be held liable for any problems with a computer
system that arises from the use of this CD-R, or for any problem
related to the purchase of a Hioki product.
Others
In the event of problems with operation, first refer to Quick Start
Section 14.4, "Troubleshooting".
Carefully read and observe all precautions in this manual.