Hioki LR8450 Скачать руководство пользователя страница 105

Страница: 105 / 310

102

Data That Can Be Saved and Loaded

Preparing for power outages and configuring associated settings

NOTICE

Do not use damaged media.

Doing so could prevent processing to close files from completing in the anticipated

amount of time, corrupting files.

Measurement data will be lost if power is interrupted during measurement. It is recommended to

make the following preparations and settings when measuring data for an extended period of time.

• Use the Z1007 Battery Pack.

When using the optional Z1007 Battery Pack, the instrument will switch immediately to battery

power if power from the AC Adapter is interrupted. In this way, measurement can be continued

without losing any data.

If the battery's remaining charge declines, the instrument will not be able to save or load data.

See “2.2 Installing a Battery Pack” in the Quick Start Manual.

• Set auto saving to

[Waveform data]

Waveform data will be saved to an SD Memory Card or USB Drive while measurement continues.

You can continue measurement in the event of a power outage by using the Z1007 Battery Pack.

See “3.3 Saving Data” (p. 105).

It is recommended to use the

[Binary]

(MEM) setting for auto saving.

Files saved using the

[Text]

(CSV) setting cannot be loaded by the instrument or the Logger

Utility.

Binary data (MEM files) saved using the

[Binary]

setting can be converted to the CSV format

using the Logger Utility.

Содержание LR8450























































































































































































































































































































Результаты поиска

Содержание LR8450

Отзывы:

Похожие инструкции для LR8450

Бренды по названию

Популярные бренды

Hioki LR8450, Инструкция по эксплуатации

Результаты поиска

Содержание LR8450

Отзывы:

Похожие инструкции для LR8450

Бренды по названию

Популярные бренды