Hioki LR8450, Инструкция по эксплуатации

Страница: 152 / 310

149
Performing Numerical Calculations
Unit Measure Channel Trigger Alarm Calculation System
7
(When [Type] is set to [Aggregation] or [Integration] )
Select the calculation method.
For information about the calculation methods, see “Numerical calculation formulas” (p. 153).
Total  Calculates the difference between the integration or area enclosed by the zero position
and the part of the signal waveform where its amplitude is positive and the integration
or area enclosed by the zero position and the part of the signal waveform where its
amplitude is negative.
Positive
Calculates the integration or area enclosed by the zero position and the part of the
signal waveform where its amplitude is positive.
Negative Calculates the integration or area enclosed by the zero position and the part of the
signal waveform where its amplitude is negative.
ABS Calculates the integration or area enclosed by the zero position and the signal
waveform.
> >
8 8
8
(When saving the numerical calculation results)
Auto saving: Configure the settings in the
[Numerical calculation results] area. (See p. 109.)
Manual saving: Under [Type] , select [Calc results] . (See p. 113.)
6
Numerical and W
aveform Calculations