Hioki LR8450, Инструкция по эксплуатации

Страница: 111 / 310

108
Saving Data
3
Under [Format] in the [Waveform data] area, select the auto save type.
OFF
 Does not perform auto-save operation.
Binary Saves data in the instrument’s dedicated format (binary format)
Text Saves data in text format (.CSV).
(When [Format] is set to [Text] )
Under [ Downsampling] , select whether to perform downsampling.
When set to [ON] , the size of the saved data file will be reduced.
OFF  , ON
(When [Downsampling] is set to [ON] )
Under [Decimation factor] , select the decimation factor.
1/2  to 1/100,000
Example: If set to
[1/5]
, 1 data point out of every 5 data points will be left.
Under [Deleting] , select the type of processing to perform if the media on which data is
being saved runs out of space (as necessary).
OFF

Ends auto-save operation.
ON
Deletes the oldest waveform file and continues auto-save operation. If the system is
unable to delete a file, it will stop saving data. Numerical calculation results will not be
deleted.
Under [Folder splitting] , select the timing at which to segment data (as necessary).
The folders in which data is saved can be segmented based on the set period of time.
Disable
 Saves in a single folder such files containing data obtained during the amount of time
set for recording. The folder will be segmented under the following conditions:
• When
[File splitting]
is set to
[Disable]
:
Segments the folder by day.
• When the number of files in the folder has reached 1000:
Switches the save destination over to folders with a sequential number appended to
(for example, 19-12-23_0001).
1 d Segments folders by day.
1 week Segments folders by week. A week is defined as lasting from Monday to Sunday.
1 month Segments folders by month.
Example: If set to [1 week]
When measurement started on Sunday, December 29, 2019, the system will regard Monday,
December 23, 2019 as the beginning of the week.
The 19-12-23 folder will automatically be created.
Example: If set to [1 month]
When measurement started on December 29, 2019, the system will regard December 1, 2019 as
the beginning of the month.
The 19-12-01 folder will automatically be created.