Hioki LR8450, Инструкция по эксплуатации

Страница: 20 / 310

16
Configuring Input Channels
1.3 Configuring Input Channels
Configure input channels for voltage measurement, temperature measurement, etc.
Channel
Un-m
The letters n and m represent a module number and a channel
number, respectively.
Input
Selects the type of measurement target.
Voltage, thermocouple, humidity, etc.
Range Sets the magnitude of the input signal.
Set the waveform color, scaling, and comments as necessary.
These settings can be configured either on each channel’s individual settings screen or on the
settings list screen for multiple channels.
Setting method
1
Set the main tab to [Channel] .
2
Select the settings screen on the sub tab.
•
[Individual]
Configure the settings on the individual settings screen for each channel.
•
[Unit n]
(n = 1, 2, . . .)
Configure the settings on the settings list screen for each module.
•
[Pulse]
Configure the settings on the settings list screen.
3
Press the ENTER key.
The focus will move to the settings area.
You can return the focus to the sub tab by pressing the ESC key.
4
Select the setting you wish to configure with the Left Arrow , Right Arrow , Up Arrow , and
Down Arrow keys.
5
Press the ENTER key.
The available settings will be displayed.
6
Select the desired setting with the Up Arrow and Down Arrow keys and then press the
ENTER key.
The setting will be accepted.