Hioki LR8450, Инструкция по эксплуатации

Страница: 15 / 310

11
Setting Measurement Conditions
Unit Measure Channel Trigger Alarm Calculation System
> >
2 2
3 3
4 4
5 5
6 6
1 1
1
Enter a title comment in the [Title comment] field (optional).
See “Title comments” (p. 47).
2
Under [Recording mode] , select type of recording.
Normal
 Data is recorded in synchronization with the internal clock.
The setting cannot be changed from [Normal] . Hioki plans to add new functionality in the future.
3
Under [Recording interval] , select the data capture interval.
Example: Choosing [10 ms] will cause data to be captured at a 10 ms interval (100 times per
second).
1 ms

* 1 , 2 ms * 1 , 5 ms * 1 , 10 ms , 20 ms , 50 ms , 100 ms , 200 ms , 500 ms ,
1 s , 2 s , 5 s , 10 s , 20 s , 30 s ,
1 min , 2 min , 5 min , 10 min , 20 min , 30 min ,
1 h
*1: Setting available only when using a module with data refresh intervals including 1 ms. (when there is at
least one U8553, U8554, LR8533, or LR8534 module for which measurement is enabled).
4
Under [Repetitive recording] , choose whether to repeat recording operation.
OFF

Stops recording after one iteration.
ON Repeats recording operation.
Measurement will stop when you press the STOP key.
1
Settings and Operation