Hioki LR8450, Инструкция по эксплуатации

Страница: 23 / 310

19
Configuring Input Channels
Unit Measure Channel Trigger Alarm Calculation System
Measuring voltage
This section describes how to configure settings on the individual settings screen when measuring
voltage.
You can use [Input] on the settings list screen to configure the settings. (See p. 50.)
Applicable modules: U8550, U8551, U8552, U8553, U8554, LR8530, LR8531, LR8532, LR8533,
LR8534
> >
3 3
4 4
1 1
2 2
1
Select the module (Unit) and channel to configure and select the checkbox.
Measurement will not be performed for channels whose checkboxes are not selected.
2
Select the waveform display color.
× (OFF), 24 colors
Select [×] if you wish to measure the channel but not to display its waveform or numerical values on the
screen.
3
Set the input type to [Voltage] .
For the U8553 and LR8533, the setting cannot be changed from [Voltage] .
4
Under [Range] , select the measurement range as appropriate for the measurement target.
(For the U8550, U8551, U8552, LR8530, LR8531, or LR8532)
10 mV  , 20 mV , 100 mV , 200 mV , 1 V , 2 V , 10 V , 20 V , 100 V , 1 to 5 V
(For the U8553 or LR8533 High Speed Voltage Unit)
100 mV

, 200 mV , 1 V , 2 V , 10 V , 20 V , 100 V , 1 to 5 V
(For the U8554 or LR8534 Strain Unit)
1 mV

, 2 mV , 5 mV , 10 mV , 20 mV , 50 mV , 100 mV , 200 mV
1
Settings and Operation