Hioki LR8450, Инструкция по эксплуатации

Страница: 94 / 310

91
Analog Triggers, Pulse Triggers, Waveform Calculation Triggers (Level, Window)
Unit Measure Channel Trigger Alarm Calculation System
Window triggers
This section describes how to specify a range (window) using upper and lower limit values and then
activate a trigger when the waveform moves into or out of that range.
You can activate a trigger either when the waveform enters the range (window IN) or when the
waveform exits the range (window OUT).
Window IN Window OUT
> > [Unit n] (n = 1, 2, . . .)
2 2
3 3
1 1
1 1
1
Under [Type] for [Start] or [Stop] , set the trigger type to [Window] .
A window trigger will be used.
2
Choose between [IN] and [OUT] for the waveform.
IN

Activates the trigger when the waveform enters the specified range.
OUT
Activates the trigger when the waveform exits the specified range.
When [Condition] is set to [AND] , the system will determine whether the waveform is inside the specified
range.
3
Under [Upper] and [Lower] , set the upper and lower limit values, respectively.
The range defined by the upper and lower limit values will serve as the window.
When using the scaling function, post-scaling values are displayed.
2
Trigger Function