Hioki LR8450, Инструкция по эксплуатации

Страница: 170 / 310

167
Controlling the System
Unit Measure Channel Trigger Alarm Calculation System
7.2 Controlling the System
This section describes how to set the time and initialize (reset) the instrument.
It also describes how to perform a self-check.
Setting the time
The instrument has a calendar with automatic leap year detection as well as a 24-hour clock.
The clock is displayed in YYYY-MM-DD HH:MM:SS format at the bottom right of the screen. Set the
time if the displayed time diverges from the actual time.
The time is used when starting measurement (start trigger time) and in file information.
> >
1 1
2 2
4 4
3 3
1
Press the ENTER key while [ Clock settings...] is selected.
The settings window will open.
2
Configure the year, month, day, hour, minute, and second settings.
See "Value entry method" (p. 7).
3
Select [ Time zone] , and then press the ENTER key.
Default setting: [GMT+9]
4
Press the ENTER key while [OK] is selected.
The time will be updated to reflect the new settings.
Press the ENTER key while [Cancel] is selected to close the window without changing the time.
7
Configuring System Settings